Net2Kern/kern/kern_synch.c
/*-
* Copyright (c) 1982, 1986, 1990 The Regents of the University of California.
* Copyright (c) 1991 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)kern_synch.c 7.18 (Berkeley) 6/27/91
*/
#include "param.h"
#include "systm.h"
#include "proc.h"
#include "kernel.h"
#include "buf.h"
#include "signalvar.h"
#include "resourcevar.h"
#include "machine/cpu.h"
u_char curpri; /* usrpri of curproc */
/*
* Force switch among equal priority processes every 100ms.
*/
roundrobin()
{
need_resched();
timeout(roundrobin, (caddr_t)0, hz / 10);
}
/*
* constants for digital decay and forget
* 90% of (p_cpu) usage in 5*loadav time
* 95% of (p_pctcpu) usage in 60 seconds (load insensitive)
* Note that, as ps(1) mentions, this can let percentages
* total over 100% (I've seen 137.9% for 3 processes).
*
* Note that hardclock updates p_cpu and p_cpticks independently.
*
* We wish to decay away 90% of p_cpu in (5 * loadavg) seconds.
* That is, the system wants to compute a value of decay such
* that the following for loop:
* for (i = 0; i < (5 * loadavg); i++)
* p_cpu *= decay;
* will compute
* p_cpu *= 0.1;
* for all values of loadavg:
*
* Mathematically this loop can be expressed by saying:
* decay ** (5 * loadavg) ~= .1
*
* The system computes decay as:
* decay = (2 * loadavg) / (2 * loadavg + 1)
*
* We wish to prove that the system's computation of decay
* will always fulfill the equation:
* decay ** (5 * loadavg) ~= .1
*
* If we compute b as:
* b = 2 * loadavg
* then
* decay = b / (b + 1)
*
* We now need to prove two things:
* 1) Given factor ** (5 * loadavg) ~= .1, prove factor == b/(b+1)
* 2) Given b/(b+1) ** power ~= .1, prove power == (5 * loadavg)
*
* Facts:
* For x close to zero, exp(x) =~ 1 + x, since
* exp(x) = 0! + x**1/1! + x**2/2! + ... .
* therefore exp(-1/b) =~ 1 - (1/b) = (b-1)/b.
* For x close to zero, ln(1+x) =~ x, since
* ln(1+x) = x - x**2/2 + x**3/3 - ... -1 < x < 1
* therefore ln(b/(b+1)) = ln(1 - 1/(b+1)) =~ -1/(b+1).
* ln(.1) =~ -2.30
*
* Proof of (1):
* Solve (factor)**(power) =~ .1 given power (5*loadav):
* solving for factor,
* ln(factor) =~ (-2.30/5*loadav), or
* factor =~ exp(-1/((5/2.30)*loadav)) =~ exp(-1/(2*loadav)) =
* exp(-1/b) =~ (b-1)/b =~ b/(b+1). QED
*
* Proof of (2):
* Solve (factor)**(power) =~ .1 given factor == (b/(b+1)):
* solving for power,
* power*ln(b/(b+1)) =~ -2.30, or
* power =~ 2.3 * (b + 1) = 4.6*loadav + 2.3 =~ 5*loadav. QED
*
* Actual power values for the implemented algorithm are as follows:
* loadav: 1 2 3 4
* power: 5.68 10.32 14.94 19.55
*/
/* calculations for digital decay to forget 90% of usage in 5*loadav sec */
#define loadfactor(loadav) (2 * (loadav))
#define decay_cpu(loadfac, cpu) (((loadfac) * (cpu)) / ((loadfac) + FSCALE))
/* decay 95% of `p_pctcpu' in 60 seconds; see CCPU_SHIFT before changing */
fixpt_t ccpu = 0.95122942450071400909 * FSCALE; /* exp(-1/20) */
/*
* If `ccpu' is not equal to `exp(-1/20)' and you still want to use the
* faster/more-accurate formula, you'll have to estimate CCPU_SHIFT below
* and possibly adjust FSHIFT in "param.h" so that (FSHIFT >= CCPU_SHIFT).
*
* To estimate CCPU_SHIFT for exp(-1/20), the following formula was used:
* 1 - exp(-1/20) ~= 0.0487 ~= 0.0488 == 1 (fixed pt, *11* bits).
*
* If you dont want to bother with the faster/more-accurate formula, you
* can set CCPU_SHIFT to (FSHIFT + 1) which will use a slower/less-accurate
* (more general) method of calculating the %age of CPU used by a process.
*/
#define CCPU_SHIFT 11
/*
* Recompute process priorities, once a second
*/
schedcpu()
{
register fixpt_t loadfac = loadfactor(averunnable[0]);
register struct proc *p;
register int s;
register unsigned int newcpu;
wakeup((caddr_t)&lbolt);
for (p = allproc; p != NULL; p = p->p_nxt) {
/*
* Increment time in/out of memory and sleep time
* (if sleeping). We ignore overflow; with 16-bit int's
* (remember them?) overflow takes 45 days.
*/
p->p_time++;
if (p->p_stat == SSLEEP || p->p_stat == SSTOP)
p->p_slptime++;
p->p_pctcpu = (p->p_pctcpu * ccpu) >> FSHIFT;
/*
* If the process has slept the entire second,
* stop recalculating its priority until it wakes up.
*/
if (p->p_slptime > 1)
continue;
/*
* p_pctcpu is only for ps.
*/
#if (FSHIFT >= CCPU_SHIFT)
p->p_pctcpu += (hz == 100)?
((fixpt_t) p->p_cpticks) << (FSHIFT - CCPU_SHIFT):
100 * (((fixpt_t) p->p_cpticks)
<< (FSHIFT - CCPU_SHIFT)) / hz;
#else
p->p_pctcpu += ((FSCALE - ccpu) *
(p->p_cpticks * FSCALE / hz)) >> FSHIFT;
#endif
p->p_cpticks = 0;
newcpu = (u_int) decay_cpu(loadfac, p->p_cpu) + p->p_nice;
p->p_cpu = min(newcpu, UCHAR_MAX);
setpri(p);
s = splhigh(); /* prevent state changes */
if (p->p_pri >= PUSER) {
#define PPQ (128 / NQS) /* priorities per queue */
if ((p != curproc) &&
p->p_stat == SRUN &&
(p->p_flag & SLOAD) &&
(p->p_pri / PPQ) != (p->p_usrpri / PPQ)) {
remrq(p);
p->p_pri = p->p_usrpri;
setrq(p);
} else
p->p_pri = p->p_usrpri;
}
splx(s);
}
vmmeter();
if (bclnlist != NULL)
wakeup((caddr_t)pageproc);
timeout(schedcpu, (caddr_t)0, hz);
}
/*
* Recalculate the priority of a process after it has slept for a while.
* For all load averages >= 1 and max p_cpu of 255, sleeping for at least
* six times the loadfactor will decay p_cpu to zero.
*/
updatepri(p)
register struct proc *p;
{
register unsigned int newcpu = p->p_cpu;
register fixpt_t loadfac = loadfactor(averunnable[0]);
if (p->p_slptime > 5 * loadfac)
p->p_cpu = 0;
else {
p->p_slptime--; /* the first time was done in schedcpu */
while (newcpu && --p->p_slptime)
newcpu = (int) decay_cpu(loadfac, newcpu);
p->p_cpu = min(newcpu, UCHAR_MAX);
}
setpri(p);
}
#define SQSIZE 0100 /* Must be power of 2 */
#define HASH(x) (( (int) x >> 5) & (SQSIZE-1))
struct slpque {
struct proc *sq_head;
struct proc **sq_tailp;
} slpque[SQSIZE];
/*
* During autoconfiguration or after a panic, a sleep will simply
* lower the priority briefly to allow interrupts, then return.
* The priority to be used (safepri) is machine-dependent, thus this
* value is initialized and maintained in the machine-dependent layers.
* This priority will typically be 0, or the lowest priority
* that is safe for use on the interrupt stack; it can be made
* higher to block network software interrupts after panics.
*/
int safepri;
/*
* General sleep call.
* Suspends current process until a wakeup is made on chan.
* The process will then be made runnable with priority pri.
* Sleeps at most timo/hz seconds (0 means no timeout).
* If pri includes PCATCH flag, signals are checked
* before and after sleeping, else signals are not checked.
* Returns 0 if awakened, EWOULDBLOCK if the timeout expires.
* If PCATCH is set and a signal needs to be delivered,
* ERESTART is returned if the current system call should be restarted
* if possible, and EINTR is returned if the system call should
* be interrupted by the signal (return EINTR).
*/
tsleep(chan, pri, wmesg, timo)
caddr_t chan;
int pri;
char *wmesg;
int timo;
{
register struct proc *p = curproc;
register struct slpque *qp;
register s;
int sig, catch = pri & PCATCH;
extern int cold;
int endtsleep();
s = splhigh();
if (cold || panicstr) {
/*
* After a panic, or during autoconfiguration,
* just give interrupts a chance, then just return;
* don't run any other procs or panic below,
* in case this is the idle process and already asleep.
*/
splx(safepri);
splx(s);
return (0);
}
#ifdef DIAGNOSTIC
if (chan == 0 || p->p_stat != SRUN || p->p_rlink)
panic("tsleep");
#endif
p->p_wchan = chan;
p->p_wmesg = wmesg;
p->p_slptime = 0;
p->p_pri = pri & PRIMASK;
qp = &slpque[HASH(chan)];
if (qp->sq_head == 0)
qp->sq_head = p;
else
*qp->sq_tailp = p;
*(qp->sq_tailp = &p->p_link) = 0;
if (timo)
timeout(endtsleep, (caddr_t)p, timo);
/*
* We put ourselves on the sleep queue and start our timeout
* before calling CURSIG, as we could stop there, and a wakeup
* or a SIGCONT (or both) could occur while we were stopped.
* A SIGCONT would cause us to be marked as SSLEEP
* without resuming us, thus we must be ready for sleep
* when CURSIG is called. If the wakeup happens while we're
* stopped, p->p_wchan will be 0 upon return from CURSIG.
*/
if (catch) {
p->p_flag |= SSINTR;
if (sig = CURSIG(p)) {
if (p->p_wchan)
unsleep(p);
p->p_stat = SRUN;
goto resume;
}
if (p->p_wchan == 0) {
catch = 0;
goto resume;
}
}
p->p_stat = SSLEEP;
p->p_stats->p_ru.ru_nvcsw++;
swtch();
resume:
curpri = p->p_usrpri;
splx(s);
p->p_flag &= ~SSINTR;
if (p->p_flag & STIMO) {
p->p_flag &= ~STIMO;
if (catch == 0 || sig == 0)
return (EWOULDBLOCK);
} else if (timo)
untimeout(endtsleep, (caddr_t)p);
if (catch && (sig != 0 || (sig = CURSIG(p)))) {
if (p->p_sigacts->ps_sigintr & sigmask(sig))
return (EINTR);
return (ERESTART);
}
return (0);
}
/*
* Implement timeout for tsleep.
* If process hasn't been awakened (wchan non-zero),
* set timeout flag and undo the sleep. If proc
* is stopped, just unsleep so it will remain stopped.
*/
endtsleep(p)
register struct proc *p;
{
int s = splhigh();
if (p->p_wchan) {
if (p->p_stat == SSLEEP)
setrun(p);
else
unsleep(p);
p->p_flag |= STIMO;
}
splx(s);
}
/*
* Short-term, non-interruptable sleep.
*/
sleep(chan, pri)
caddr_t chan;
int pri;
{
register struct proc *p = curproc;
register struct slpque *qp;
register s;
extern int cold;
#ifdef DIAGNOSTIC
if (pri > PZERO) {
printf("sleep called with pri %d > PZERO, wchan: %x\n",
pri, chan);
panic("old sleep");
}
#endif
s = splhigh();
if (cold || panicstr) {
/*
* After a panic, or during autoconfiguration,
* just give interrupts a chance, then just return;
* don't run any other procs or panic below,
* in case this is the idle process and already asleep.
*/
splx(safepri);
splx(s);
return;
}
#ifdef DIAGNOSTIC
if (chan==0 || p->p_stat != SRUN || p->p_rlink)
panic("sleep");
#endif
p->p_wchan = chan;
p->p_wmesg = NULL;
p->p_slptime = 0;
p->p_pri = pri;
qp = &slpque[HASH(chan)];
if (qp->sq_head == 0)
qp->sq_head = p;
else
*qp->sq_tailp = p;
*(qp->sq_tailp = &p->p_link) = 0;
p->p_stat = SSLEEP;
p->p_stats->p_ru.ru_nvcsw++;
swtch();
curpri = p->p_usrpri;
splx(s);
}
/*
* Remove a process from its wait queue
*/
unsleep(p)
register struct proc *p;
{
register struct slpque *qp;
register struct proc **hp;
int s;
s = splhigh();
if (p->p_wchan) {
hp = &(qp = &slpque[HASH(p->p_wchan)])->sq_head;
while (*hp != p)
hp = &(*hp)->p_link;
*hp = p->p_link;
if (qp->sq_tailp == &p->p_link)
qp->sq_tailp = hp;
p->p_wchan = 0;
}
splx(s);
}
/*
* Wakeup on "chan"; set all processes
* sleeping on chan to run state.
*/
wakeup(chan)
register caddr_t chan;
{
register struct slpque *qp;
register struct proc *p, **q;
int s;
s = splhigh();
qp = &slpque[HASH(chan)];
restart:
for (q = &qp->sq_head; p = *q; ) {
#ifdef DIAGNOSTIC
if (p->p_rlink || p->p_stat != SSLEEP && p->p_stat != SSTOP)
panic("wakeup");
#endif
if (p->p_wchan == chan) {
p->p_wchan = 0;
*q = p->p_link;
if (qp->sq_tailp == &p->p_link)
qp->sq_tailp = q;
if (p->p_stat == SSLEEP) {
/* OPTIMIZED INLINE EXPANSION OF setrun(p) */
if (p->p_slptime > 1)
updatepri(p);
p->p_slptime = 0;
p->p_stat = SRUN;
if (p->p_flag & SLOAD)
setrq(p);
/*
* Since curpri is a usrpri,
* p->p_pri is always better than curpri.
*/
if ((p->p_flag&SLOAD) == 0)
wakeup((caddr_t)&proc0);
else
need_resched();
/* END INLINE EXPANSION */
goto restart;
}
} else
q = &p->p_link;
}
splx(s);
}
/*
* Initialize the (doubly-linked) run queues
* to be empty.
*/
rqinit()
{
register int i;
for (i = 0; i < NQS; i++)
qs[i].ph_link = qs[i].ph_rlink = (struct proc *)&qs[i];
}
/*
* Change process state to be runnable,
* placing it on the run queue if it is in memory,
* and awakening the swapper if it isn't in memory.
*/
setrun(p)
register struct proc *p;
{
register int s;
s = splhigh();
switch (p->p_stat) {
case 0:
case SWAIT:
case SRUN:
case SZOMB:
default:
panic("setrun");
case SSTOP:
case SSLEEP:
unsleep(p); /* e.g. when sending signals */
break;
case SIDL:
break;
}
p->p_stat = SRUN;
if (p->p_flag & SLOAD)
setrq(p);
splx(s);
if (p->p_slptime > 1)
updatepri(p);
p->p_slptime = 0;
if ((p->p_flag&SLOAD) == 0)
wakeup((caddr_t)&proc0);
else if (p->p_pri < curpri)
need_resched();
}
/*
* Compute priority of process when running in user mode.
* Arrange to reschedule if the resulting priority
* is better than that of the current process.
*/
setpri(p)
register struct proc *p;
{
register unsigned int newpri;
newpri = PUSER + p->p_cpu / 4 + 2 * p->p_nice;
newpri = min(newpri, MAXPRI);
p->p_usrpri = newpri;
if (newpri < curpri)
need_resched();
}