V3/usr/man/man0/index
20boot(VIII): reboot 11/20 system
dp(IV): 201 Dataphone
20boot(VIII): reboot 11/20 system
greek(VII): extended TTY 37 typebox map
dn(IV): 801 ACU
tm 9-track magtape
:(I): place label
a.out(V): assembler and loader output
chmod(I): change access mode of files
crypt(III): encrypt according to a keyword
wtmp(V): accounting files
acct(VIII): get connect-time accounting
acct(VIII): get connect-time accounting
dn(IV): 801 ACU
getty(VII): adapt to typewriter
chk(VIII): check all file systems
salloc(III): storage allocator
dup(II): duplicate an open file
yacc(VI): yet another compiler-compiler
mail(I): send mail to another user
write(I): write to another user
ar(I): archive (combine) files
archive(V): archive file
archive(V): archive file
atan(III): arctangent
glob(VII): argument expander
echo(I): print command arguments
ar(I): archive (combine) files
sort(I): sort ASCII file
atof(III): convert ASCII to floating
atoi(III): convert ASCII to integer
ascii(VII): map of ASCII
ascii(VII): map of ASCII
ctime(III): convert time to ASCII
convert floating to ASCII...ftoa(III):
itoa(III): convert integer to ASCII
as(I): assembler
a.out(V): assembler and loader output
as(I): assembler
sync(II): assure synchronization
atan(III): arctangent
atof(III): convert ASCII to floating
atoi(III): convert ASCII to integer
bc(VI): compile B program
log(III): logarithm base e
bas(I): BASIC dialect
bas(I): BASIC dialect
bc(VI): compile B program
dli(VIII): load DEC binary paper tapes
remove symbols, relocation bits...strip(I):
bj(VI): blackjack
bj(VI): blackjack
bproc(VIII): boot procedure
boot(II): reboot the system
bproc(VIII): boot procedure
split(I): break a file into pieces
break(II): set program break
break(II): set program break
istat(VIII): file status by i-number
cdb(I): C debugger
cc(I): compile C program
dc(I): desk calculator
cemt(II): catch EMT traps
fpe(II): catch floating exception errors
ilgins(II): catch illegal instruction trap
intr(II): catch or inhibit interrupts
cat(I): concatenate (or print) files
cc(I): compile C program
cdb(I): C debugger
cemt(II): catch EMT traps
chmod(I): change access mode of files
chmod(II): change mode of file
chown(I): change owner of files
chown(II): change owner of file
chdir(I): change working directory
chdir(II): change working directory
pipe(II): open inter process channel
ddsput(III): display character on Picturephone
putc(III): write character or word
getc(III): get character
chdir(I): change working directory
chdir(II): change working directory
chk(VIII): check all file systems
check(VIII): check consistency of file system
system... check(VIII): check consistency of file
chk(VIII): check all file systems
chmod(I): change access mode of files
chmod(II): change mode of file
chown(I): change owner of files
chown(II): change owner of file
clri(VIII): clear file's i-node
close(II): close open file
close(II): close open file
clri(VIII): clear file's i-node
cmp(I): compare file contents
ar(I): archive (combine) files
echo(I): print command arguments
sh(I): command interpreter
exit(I): end command sequence
goto(I): command transfer
if(I): conditional command
gerts(III): communicate with GCOS
tss(I): communicate with MH-TSS (GCOS)
cmp(I): compare file contents
compar(III): string compare for sort
proof(I): compare text files
compar(III): string compare for sort
bc(VI): compile B program
cc(I): compile C program
fc(I): compile Fortran program
sno(I): compile Snobol program
tmg(I): compile tmgl program
yacc(VI): yet another compiler-compiler
hypot(III): compute hypotenuse
cat(I): concatenate (or print) files
if(I): conditional command
acct(VIII): get connect-time accounting
check(VIII): check consistency of file system
csw(II): read the console switches
kl(IV): console typewriter
ls(I): list contents of directory
cmp(I): compare file contents
ecvt(III): edited output conversion
atof(III): convert ASCII to floating
atoi(III): convert ASCII to integer
ftoa(III): convert floating to ASCII
ftoo(III): convert floating to octal
itoa(III): convert integer to ASCII
ctime(III): convert time to ASCII
cp(I): copy file
core(V): core image file
mem(IV): core memory
core(V): core image file
sin(III): sine, cosine
wc(I): get (English) word count
cp(I): copy file
makdir(II): create directory
mkdir(I): create directory
creat(II): create file
fork(II): create new process
creat(II): create file
cref(I): cross reference table
cref(I): cross reference table
crypt(I): encrypt, decrypt a file
crypt(III): encrypt according to a keyword
csw(II): read the console switches
ctime(III): convert time to ASCII
dpd(VII): spawn dataphone daemon
salv(VIII): repair damaged file system
dpd(VII): spawn dataphone daemon
dp(IV): 201 Dataphone
date(I): get date and time of day
mdate(II): set date modified of file
date(I): get date and time of day
date(I): get date and time of day
db(I): symbolic debugger
dcheck(VIII): verify directory hierarchy
dc(I): desk calculator
dc(IV): remote typewriter
Picturephone... ddsput(III): display character on
cdb(I): C debugger
db(I): symbolic debugger
dli(VIII): load DEC binary paper tapes
crypt(I): encrypt, decrypt a file
tap(V): DECtape and magtape format
rew(I): rewind DECtape
save, restore files on DECtape...tap(I):
tc(IV): DECtape
sleep(II): delay execution
dsw(I): delete files interactively
rmdir(I): remove (delete) directory
rm(I): remove (delete) file
unlink(II): remove (delete) file
mesg(I): permit or deny messages
switch(III): transfer depending on value
dc(I): desk calculator
kill(II): destroy process
df(I): find free disk space
bas(I): BASIC dialect
directory(V): directory format
dcheck(VIII): verify directory hierarchy
directory(V): directory format
chdir(I): change working directory
chdir(II): change working directory
ls(I): list contents of directory
makdir(II): create directory
mkdir(I): create directory
rmdir(I): remove (delete) directory
df(I): find free disk space
du(I): find disk usage
rf(IV): RF disk
rk(IV): RK disk
umount(II): dismount file system
ddsput(III): display character on Picturephone
vt(IV): storage-tube display
dli(VIII): load DEC binary paper tapes
dn(IV): 801 ACU
dpd(VII): spawn dataphone daemon
dp(IV): 201 Dataphone
dsw(I): delete files interactively
du(I): find disk usage
od(I): octal dump of file
dup(II): duplicate an open file
dup(II): duplicate an open file
uniq(I): find duplicate lines in a file
echo(I): print command arguments
ecvt(III): edited output conversion
ed(I): text editor
ecvt(III): edited output conversion
ld(I): link editor (loader)
ed(I): text editor
fed(I): form letter editor
cemt(II): catch EMT traps
crypt(III): encrypt according to a keyword
crypt(I): encrypt, decrypt a file
exit(I): end command sequence
wc(I): get (English) word count
catch floating exception errors...fpe(II):
typo(I): find typographic errors
fpe(II): catch floating exception errors
exec(II): execute program file
size(I): get executable program size
exec(II): execute program file
times(II): get execution times
exit(II): terminate execution
sleep(II): delay execution
exit(I): end command sequence
exit(II): terminate execution
glob(VII): argument expander
exp(III): exponential function
exp(III): exponential function
greek(VII): extended TTY 37 typebox map
log(III): logarithm base e
factor(I): factor a number
factor(I): factor a number
fc(I): compile Fortran program
fed(I): form letter editor
cmp(I): compare file contents
split(I): break a file into pieces
opr(I): print file off-line
type(I): print file page-by-page
ov(I): page overlay file print
istat(VIII): file status by i-number
stat(I): get file status
stat(II): get file status
file system(V): file system format
chk(VIII): check all file systems
file system(V): file system format
check consistency of file system...check(VIII):
mount(II): mount file system
mount(VIII): mount removable file system
salv(VIII): repair damaged file system
umount(II): dismount file system
pr(I): print file with headings
clri(VIII): clear file's i-node
dsw(I): delete files interactively
tap(I): save, restore files on DECtape
mt(I): save, restore files on magtape
ar(I): archive (combine) files
concatenate (or print) files...cat(I):
change access mode of files...chmod(I):
chown(I): change owner of files
proof(I): compare text files
reloc(I): relocate object files
wtmp(V): accounting files
archive(V): archive file
chmod(II): change mode of file
chown(II): change owner of file
close(II): close open file
core(V): core image file
cp(I): copy file
creat(II): create file
crypt(I): encrypt, decrypt a file
dup(II): duplicate an open file
exec(II): execute program file
fstat(II): status of open file
link(II): link to file
ln(I): link to file
set date modified of file...mdate(II):
mv(I): move or rename file
od(I): octal dump of file
open(II): open file
passwd(V): password file
read(II): read file
rm(I): remove (delete) file
sort(I): sort ASCII file
sum(I): sum file
find duplicate lines in a file...uniq(I):
unlink(II): remove (delete) file
write(II): write file
du(I): find disk usage
uniq(I): find duplicate lines in a file
df(I): find free disk space
hyphen(I): find hyphenated words
tty(I): find name of terminal
ttyn(III): find teletype name
typo(I): find typographic errors
un(I): find undefined symbols
fpe(II): catch floating exception errors
ftoa(III): convert floating to ASCII
ftoo(III): convert floating to octal
atof(III): convert ASCII to floating
fork(II): create new process
fed(I): form letter editor
forml(I): generate form letters
form(I): generate form letter
nroff(I): format text for printing
roff(I): format text for printing
directory(V): directory format
file system(V): file system format
tap(V): DECtape and magtape format
form(I): generate form letter
forml(I): generate form letters
fc(I): compile Fortran program
fpe(II): catch floating exception errors
df(I): find free disk space
fstat(II): status of open file
ftoa(III): convert floating to ASCII
ftoo(III): convert floating to octal
exp(III): exponential function
communicate with MH-TSS (GCOS)...tss(I):
gerts(III): communicate with GCOS
forml(I): generate form letters
form(I): generate form letter
vs(I): generate voice synthesizer phonemes
pseudo random number generator...rand(III):
gerts(III): communicate with GCOS
getc(III): get character
acct(VIII): get connect-time accounting
date(I): get date and time of day
wc(I): get (English) word count
size(I): get executable program size
times(II): get execution times
stat(I): get file status
stat(II): get file status
ps(VIII): get process status
time(I): get time information
time(II): get time of year
gtty(II): get typewriter mode
getuid(II): get user ID
getc(III): get character
getty(VII): adapt to typewriter
getuid(II): get user ID
glob(VII): argument expander
goto(I): command transfer
greek(VII): extended TTY 37 typebox map
gtty(II): get typewriter mode
pr(I): print file with headings
verify directory hierarchy...dcheck(VIII):
hyphen(I): find hyphenated words
hyphen(I): find hyphenated words
hypot(III): compute hypotenuse
hypot(III): compute hypotenuse
clri(VIII): clear file's i-node
istat(VIII): file status by i-number
getuid(II): get user ID
setuid(II): set user ID
if(I): conditional command
ilgins(II): catch illegal instruction trap
ilgins(II): catch illegal instruction trap
core(V): core image file
uniq(I): find duplicate lines in a file
ptx(VI): permuted index
time(I): get time information
utmp(V): logged-in user information
intr(II): catch or inhibit interrupts
quit(II): inhibit quits
init(VII): initializer process
init(VII): initializer process
ilgins(II): catch illegal instruction trap
itoa(III): convert integer to ASCII
atoi(III): convert ASCII to integer
pipe(II): open inter process channel
dsw(I): delete files interactively
sh(I): command interpreter
intr(II): catch or inhibit interrupts
split(I): break a file into pieces
intr(II): catch or inhibit interrupts
istat(VIII): file status by i-number
itoa(III): convert integer to ASCII
encrypt according to a keyword...crypt(III):
kill(II): destroy process
kill(VIII): terminate a process
kl(IV): console typewriter
:(I): place label
ld(I): link editor (loader)
fed(I): form letter editor
forml(I): generate form letters
form(I): generate form letter
uniq(I): find duplicate lines in a file
ld(I): link editor (loader)
link(II): link to file
ln(I): link to file
link(II): link to file
ls(I): list contents of directory
nlist(III): read name list
ln(I): link to file
dli(VIII): load DEC binary paper tapes
a.out(V): assembler and loader output
ld(I): link editor (loader)
login(I): log on to system
log(III): logarithm base e
utmp(V): logged-in user information
log(III): logarithm base e
passwd(I): set login password
login(I): log on to system
nice(II): set low-priority status
ls(I): list contents of directory
m6(I): macroprocessor
m6(I): macroprocessor
tap(V): DECtape and magtape format
mt(I): save, restore files on magtape
tm 9-track magtape
mail(I): send mail to another user
mail(I): send mail to another user
makdir(II): create directory
man(I): run off manual section
man(I): run off manual section
ascii(VII): map of ASCII
extended TTY 37 typebox map...greek(VII):
mdate(II): set date modified of file
mem(IV): core memory
mem(IV): core memory
mesg(I): permit or deny messages
mesg(III): print string on typewriter
mesg(I): permit or deny messages
tss(I): communicate with MH-TSS (GCOS)
msh(VII): mini Shell
mkdir(I): create directory
chmod(I): change access mode of files
chmod(II): change mode of file
stty(II): set mode of typewriter
stty(I): set typewriter modes
gtty(II): get typewriter mode
mdate(II): set date modified of file
mount(II): mount file system
mount(VIII): mount removable file system
mount(II): mount file system
mount(VIII): mount removable file system
mv(I): move or rename file
seek(II): move read or write pointer
msh(VII): mini Shell
mt(I): save, restore files on magtape
mv(I): move or rename file
nlist(III): read name list
tty(I): find name of terminal
nm(I): print namelist
ttyn(III): find teletype name
fork(II): create new process
nice(II): set low-priority status
nlist(III): read name list
nm(I): print namelist
nroff(I): format text for printing
rand(III): pseudo random number generator
pow(III): take powers of numbers
factor(I): factor a number
reloc(I): relocate object files
od(I): octal dump of file
convert floating to octal...ftoo(III):
od(I): octal dump of file
man(I): run off manual section
opr(I): print file off-line
close(II): close open file
dup(II): duplicate an open file
fstat(II): status of open file
open(II): open file
pipe(II): open inter process channel
open(II): open file
opr(I): print file off-line
cat(I): concatenate (or print) files
ecvt(III): edited output conversion
assembler and loader output...a.out(V):
ov(I): page overlay file print
ov(I): page overlay file print
chown(I): change owner of files
chown(II): change owner of file
ov(I): page overlay file print
type(I): print file page-by-page
dli(VIII): load DEC binary paper tapes
pc(IV): punched paper tape
passwd(I): set login password
passwd(V): password file
passwd(V): password file
passwd(I): set login password
pc(IV): punched paper tape
mesg(I): permit or deny messages
ptx(VI): permuted index
generate voice synthesizer phonemes...vs(I):
vsp(VII): voice synthesizer phonemes
display character on Picturephone...ddsput(III):
split(I): break a file into pieces
pipe(II): open inter process channel
:(I): place label
seek(II): move read or write pointer
pow(III): take powers of numbers
pow(III): take powers of numbers
pr(I): print file with headings
echo(I): print command arguments
opr(I): print file off-line
type(I): print file page-by-page
pr(I): print file with headings
nm(I): print namelist
mesg(III): print string on typewriter
ptime(III): print time
cat(I): concatenate (or print) files
nroff(I): format text for printing
roff(I): format text for printing
ov(I): page overlay file print
bproc(VIII): boot procedure
pipe(II): open inter process channel
ps(VIII): get process status
rele(II): release processor
fork(II): create new process
init(VII): initializer process
kill(II): destroy process
kill(VIII): terminate a process
wait(II): wait for process
break(II): set program break
exec(II): execute program file
size(I): get executable program size
bc(VI): compile B program
cc(I): compile C program
fc(I): compile Fortran program
sno(I): compile Snobol program
tmg(I): compile tmgl program
proof(I): compare text files
rand(III): pseudo random number generator
ps(VIII): get process status
ptime(III): print time
ptx(VI): permuted index
pc(IV): punched paper tape
putc(III): write character or word
qsort(III): quicker sort
qsort(III): quicker sort
quit(II): inhibit quits
quit(II): inhibit quits
rand(III): pseudo random number generator
rand(III): pseudo random number generator
read(II): read file
nlist(III): read name list
seek(II): move read or write pointer
csw(II): read the console switches
read(II): read file
20boot(VIII): reboot 11/20 system
boot(II): reboot the system
cref(I): cross reference table
rele(II): release processor
rele(II): release processor
reloc(I): relocate object files
strip(I): remove symbols, relocation bits
reloc(I): relocate object files
dc(IV): remote typewriter
mount(VIII): mount removable file system
rmdir(I): remove (delete) directory
rm(I): remove (delete) file
unlink(II): remove (delete) file
strip(I): remove symbols, relocation bits
mv(I): move or rename file
salv(VIII): repair damaged file system
tap(I): save, restore files on DECtape
mt(I): save, restore files on magtape
rew(I): rewind DECtape
rew(I): rewind DECtape
rf(IV): RF disk
rf(IV): RF disk
rk(IV): RK disk
rk(IV): RK disk
rmdir(I): remove (delete) directory
rm(I): remove (delete) file
roff(I): format text for printing
sqrt(III): square root
man(I): run off manual section
salloc(III): storage allocator
salv(VIII): repair damaged file system
tap(I): save, restore files on DECtape
mt(I): save, restore files on magtape
man(I): run off manual section
seek(II): move read or write pointer
mail(I): send mail to another user
speak(I): send words to voice synthesizer
exit(I): end command sequence
mdate(II): set date modified of file
passwd(I): set login password
nice(II): set low-priority status
stty(II): set mode of typewriter
break(II): set program break
stime(II): set system time
tabs(VII): set tab stops on typewriter
stty(I): set typewriter modes
setuid(II): set user ID
setuid(II): set user ID
msh(VII): mini Shell
sh(I): command interpreter
sin(III): sine, cosine
sin(III): sine, cosine
size(I): get executable program size
get executable program size...size(I):
sleep(II): delay execution
sno(I): compile Snobol program
sno(I): compile Snobol program
sort(I): sort ASCII file
sort(I): sort ASCII file
string compare for sort...compar(III):
qsort(III): quicker sort
df(I): find free disk space
dpd(VII): spawn dataphone daemon
speak(I): send words to voice synthesizer
split(I): break a file into pieces
sqrt(III): square root
sqrt(III): square root
stat(I): get file status
stat(II): get file status
istat(VIII): file status by i-number
fstat(II): status of open file
nice(II): set low-priority status
ps(VIII): get process status
stat(I): get file status
stat(II): get file status
stime(II): set system time
tabs(VII): set tab stops on typewriter
salloc(III): storage allocator
vt(IV): storage-tube display
compar(III): string compare for sort
mesg(III): print string on typewriter
strip(I): remove symbols, relocation bits
stty(I): set typewriter modes
stty(II): set mode of typewriter
sum(I): sum file
sum(I): sum file
csw(II): read the console switches
switch(III): transfer depending on value
db(I): symbolic debugger
strip(I): remove symbols, relocation bits
un(I): find undefined symbols
sync(II): assure synchronization
sync(II): assure synchronization
vs(I): generate voice synthesizer phonemes
vsp(VII): voice synthesizer phonemes
speak(I): send words to voice synthesizer
file system(V): file system format
stime(II): set system time
chk(VIII): check all file systems
file system(V): file system format
20boot(VIII): reboot 11/20 system
boot(II): reboot the system
check consistency of file system...check(VIII):
login(I): log on to system
mount(II): mount file system
mount removable file system...mount(VIII):
repair damaged file system...salv(VIII):
umount(II): dismount file system
who(I): who is on the system
tabs(VII): set tab stops on typewriter
cref(I): cross reference table
tabs(VII): set tab stops on typewriter
pow(III): take powers of numbers
load DEC binary paper tapes...dli(VIII):
pc(IV): punched paper tape
tap(I): save, restore files on DECtape
tap(V): DECtape and magtape format
tc(IV): DECtape
ttyn(III): find teletype name
tty(I): find name of terminal
kill(VIII): terminate a process
exit(II): terminate execution
ed(I): text editor
proof(I): compare text files
nroff(I): format text for printing
roff(I): format text for printing
time(I): get time information
date(I): get date and time of day
time(II): get time of year
ctime(III): convert time to ASCII
time(I): get time information
time(II): get time of year
times(II): get execution times
times(II): get execution times
ptime(III): print time
stime(II): set system time
tm 9-track magtape
tmg(I): compile tmgl program
tmg(I): compile tmgl program
switch(III): transfer depending on value
goto(I): command transfer
cemt(II): catch EMT traps
catch illegal instruction trap...ilgins(II):
tss(I): communicate with MH-TSS (GCOS)
greek(VII): extended TTY 37 typebox map
tty(I): find name of terminal
ttyn(III): find teletype name
greek(VII): extended TTY 37 typebox map
type(I): print file page-by-page
stty(I): set typewriter modes
gtty(II): get typewriter mode
dc(IV): remote typewriter
getty(VII): adapt to typewriter
kl(IV): console typewriter
mesg(III): print string on typewriter
stty(II): set mode of typewriter
tabs(VII): set tab stops on typewriter
typo(I): find typographic errors
typo(I): find typographic errors
umount(II): dismount file system
un(I): find undefined symbols
un(I): find undefined symbols
uniq(I): find duplicate lines in a file
unlink(II): remove (delete) file
du(I): find disk usage
getuid(II): get user ID
setuid(II): set user ID
utmp(V): logged-in user information
mail(I): send mail to another user
write(I): write to another user
utmp(V): logged-in user information
transfer depending on value...switch(III):
dcheck(VIII): verify directory hierarchy
vs(I): generate voice synthesizer phonemes
vsp(VII): voice synthesizer phonemes
speak(I): send words to voice synthesizer
vs(I): generate voice synthesizer phonemes
vsp(VII): voice synthesizer phonemes
vt(IV): storage-tube display
wait(II): wait for process
wait(II): wait for process
wc(I): get (English) word count
who(I): who is on the system
who(I): who is on the system
gerts(III): communicate with GCOS
pr(I): print file with headings
tss(I): communicate with MH-TSS (GCOS)
wc(I): get (English) word count
speak(I): send words to voice synthesizer
hyphen(I): find hyphenated words
putc(III): write character or word
chdir(I): change working directory
chdir(II): change working directory
putc(III): write character or word
write(II): write file
seek(II): move read or write pointer
write(I): write to another user
write(I): write to another user
write(II): write file
wtmp(V): accounting files
yacc(VI): yet another compiler-compiler
time(II): get time of year
yacc(VI): yet another compiler-compiler